6AOUTG23RB · Category 6A Outdoor Gel Filled, 23 AWG, 4 Pair, 1000 ft. Wooden Reel

Category 6A direct burial gel-filled network cable featuring a 23 AWG, 4-pair solid bare copper construction with water-blocking gel, internal separator spline, and a UV-rated polyethylene (LDPE) jacket for installation in outdoor plant and underground direct burial applications. Tested to ANSI/TIA 568-C.2 for full 10GBASE-T transmission at 10 Gbps over 500 MHz of bandwidth across the complete 100-meter channel — delivering maximum headroom, bandwidth, and long-term protection against moisture and environmental exposure. The gel filling blocks the entrance and migration of water, while the internal spline stabilizes each pair for superior electrical performance while maintaining flexibility and a clean, round cable profile. Built for extreme operating temperatures (-40°C to 75°C) and Power over Ethernet (PoE/PoE+) applications. Includes an internal rip cord for simplified jacket stripping. Supplied on a 1,000 ft wooden reel.

Specifications

• Conductor: 23 AWG solid bare copper, 0.565 mm

• Pairs: 4

• Water Blocking: Gel filled

• Separator: Internal spline divider

• Insulation: HDPE, 1.12 mm diameter

• Jacket: UV-rated LDPE, direct burial rated

• Outside diameter: 7.1 mm (±0.4 mm)

• Impedance: 100 ±15 ohms (1.0–250.0 MHz) / 100 ±22 ohms (250.0–500.0 MHz)

• Bandwidth: 500 MHz, 10 Gbps up to 100 m

• Delay skew: ≤45 ns/100 m

• DC resistance: 9.38 ohms/100 m max

• DC loop resistance: 19.0 ohms/100 m max

• DC resistance unbalance: 5.0% max

• Unbalanced-to-ground capacitance: 330 pF/100 m max

• Velocity of propagation (NVP): 65%

• Voltage rating: DC 300V

• Temperature range: -40°C to 75°C

• Rip cord: Yes

• Drain wire: No

• Length: 1,000 ft ±4 ft

• Weight: 35 lbs per 1,000 ft wooden reel

• Standards: ANSI/TIA 568-C.2, ANSI/TIA 862 (Building Automation), ISO/IEC 11801 Ed. 2.0 Class E1, ICEA 8-102-700, RoHS, REACH, CPR (305/2011 & EN 50575:2014-09)